Filter
Top Products
43
GB
D:\NORM'S JOB\SONY HA\SO0056\STR-DA3500ES\CEL VERSION\GB\4144907431\01GB-
STRDA3500ESUC\030CON_GB.fm
masterpage: Right
STR-DA3500ES
4-144-907-43(1)
Getting Started
8: Setting the speakers
Set the appropriate speaker impedance for the
speakers you are using.
1 Press GUI MODE repeatedly to
select “GUI ON”.
The GUI menu appears on the TV screen.
Press MENU if the GUI menu does not
appear on the TV screen.
2 Press V/v repeatedly to select
“Settings”, then press or b.
The Settings menu list appears on the TV
screen.
3 Press V/v repeatedly to select
“Speaker”, then press or b.
4 Press V/v repeatedly to select
“Impedance”, then press .
5 Press V/v repeatedly to select
“4 :” or “8 :” depending on
the speakers you are using,
then press .
Notes
•If you are not sure of the impedances of the
speakers, refer to the operating instructions
supplied with your speakers. (This information is
often found on the back of the speaker.)
•When you connect all speakers with a normal
impedance of 8 ohms or higher, set “Impedance” to
“8 :”. When connecting other types of speakers,
set it to “4 :”.
•When you connect front speakers to both the
SPEAKERS A and B terminals, connect the
speakers with a normal impedance of 8 ohms or
higher.
– When you connect speakers with impedance of
16 ohms or higher in both “A” and “B”
configuration:
Set “Impedance” to “8 :” in the Speaker
settings menu.
– For other types of speakers in other
configurations:
Set “Impedance” to “4 :” in the Speaker
settings menu.
Setting the speaker impedances
MENU
,
V/v/B/b
GUI
MODE