Sony 4-144-907-43(1) Stereo Receiver User Manual


 
127
GB
D:\NORM'S JOB\SONY HA\SO0056\STR-DA3500ES\CEL VERSION\GB\4144907431\01GB-
STRDA3500ESUC\110ADD_GB.fm
masterpage: Right
STR-DA3500ES
4-144-907-43(1)
Additional
Information
Video
There is no picture or an unclear
picture appears on the TV screen.
Select the appropriate input on the receiver
(page 50).
Set your TV to the appropriate input mode.
Move your audio components away from
the TV.
Assign the video input correctly.
The input signal should be same as input
when you are up-converting an input
signal with this receiver (page 33).
The image of the COMPONENT VIDEO
OUT is corrupted.
Video input signals other than 480p
component are not received when signals
are output from the VIDEO jack. Input
480i component video signals.
When component input signals other than
480p are output, use the COMPONENT
VIDEO MONITOR OUT jack and set
“Resolution” to “DIRECT”.
Recording cannot be carried out.
Check that the components are connected
correctly (page 25).
Select the source component using INPUT
SELECTOR (page 50).
The GUI does not appear on the TV
screen.
Press GUI MODE repeatedly to select
“GUI ON”. Press MENU if the GUI menu
does not appear on the TVscreen.
Check that the TV is connected correctly.
HDMI
The source sound input to the HDMI
jack is not output from the receiver or
the TV speaker.
• Check the HDMI connection (page 77).
• You cannot listen to the DSD signals of
Super Audio CD by connecting HDMI.
• Depending on the playback component,
you may need to set up the component.
Refer to the operating instructions
supplied with each component.
• Be sure to use a connecting cable for the
HDMI jack corresponding to high speed
(an HDMI version 1.3a, category 2 cable)
when you view images or listen to sound
during a 1080p or Deep Color (Deep
Colour) transmission.
The source image input to the HDMI
jack is not output from the TV.
• Check the HDMI connection (page 77).
• Depending on the playback component,
you may need to set up the component.
Refer to the operating instructions
supplied with each component.
• Be sure to use a connecting cable for the
HDMI jack corresponding to high speed
(an HDMI version 1.3a, category 2 cable)
when you view images or listen to sound
during a 1080p or Deep Color (Deep
Colour) transmission.
continued