Filter
Top Products
101
GB
D:\NORM'S JOB\SONY HA\SO0056\STR-DA3500ES\CEL VERSION\GB\4144907431\01GB-
STRDA3500ESUC\090OTH_GB.fm
masterpage: Right
STR-DA3500ES
4-144-907-43(1)
Other Operations
You can record onto a MiniDisc or audio tape
using the receiver. Refer to the operating
instructions supplied with your MD deck or
tape deck.
1 Press the input button of the
playback component.
You can also use INPUT SELECTOR on
the receiver.
2 Prepare the playback
component for playing.
For example, insert a CD into the CD
player.
3 Prepare the recording
component.
Insert a blank MD or tape into the
recording deck and adjust the recording
level.
4 Start recording on the
recording deck, then start
playback on the playback
component.
Notes
•Sound adjustments do not affect the signal output
from the MD/TAPE OUT jacks.
•The audio input signals from the MULTI
CHANNEL INPUT jacks are not output.
To record digital sound
Connect a component for playback to the
digital audio input (OPTICAL IN) jack, and
connect the recording component to the
OPTICAL MD/TAPE OUT jack.
1 Press the input button of the
playback component.
You can also use INPUT SELECTOR on
the receiver.
2 Prepare the component for
playing.
For example, insert the video tape you
want to copy into the VCR.
3 Prepare the recording
component.
Insert a blank video tape, etc., into the
recording component (VIDEO 1) for
recording.
4 Start recording on the
recording component, then
start playback on the playback
component.
Notes
•Some sources contain copy guards to prevent
recording. In this case, you may not be able to
record from the sources.
•The audio input signals from the MULTI
CHANNEL INPUT jacks are not output.
•Only analog input signals are output from the
analog output jack (for recording).
•Only digital input signals are output from the
digital output jack (for recording).
•HDMI sound cannot be recorded.
Recording onto a MiniDisc or
audio tape
Recording onto a recording
media