Sony 3-299-549-11(1) Home Theater System User Manual


 
Various Functions for Playing Discs
45
GB
When you stop the disc, the system remembers
the point where you pressed x and “Resume”
appears in the front panel display. As long as
you do not remove the disc, Resume Play will
work even if the system is set to standby mode
by pressing "/1.
1 While playing a disc, press x to stop
playback.
“Resume” appears in the front panel
display.
2 Press H.
The system starts playback from the point
where you stopped the disc in Step 1.
Note
Depending on where you stop the disc, the system
may not resume playback from exactly the same
point.
• The point where you stopped playing may be cleared
when:
you eject the disc.
the system enters standby mode (DATA CD/
DATA DVD only).
you change or reset the settings on the Setup
Display.
you change the function by pressing FUNCTION.
you disconnect the AC power cord (mains lead).
you change the parental control level.
For a DVD-VR, VIDEO CD, CD, DATA CD, and
DATA DVD, the system remembers the resume
playback point for the current disc.
• Resume Play does not work during Program Play and
Shuffle Play.
This function may not work properly with some
discs.
Ti
p
To play from the beginning of the disc, press x twice,
then press H.
To enjoy a disc that is played
before by resume playback
(Multi-disc Resume)
(DVD VIDEO, VIDEO CD only)
This system recalls the point where you stopped
the disc the last time it was played and resumes
playback from that point the next time you insert
the same disc. When the resume playback
memory is full, the resume playback point for
the earliest disc is deleted.
To activate this function, set [MULTI-DISC
RESUME] in [SYSTEM SETUP] to [ON]. For
details, see “[MULTI-DISC RESUME] (DVD
VIDEO/VIDEO CD only)” (page 96).
Note
• If [MULTI-DISC RESUME] in [SYSTEM SETUP]
is set to [OFF] (page 96), the resume point is cleared
when you change the function by pressing
FUNCTION.
• This system can store at least 10 resume playback
points.
Ti
p
To play from the beginning of the disc, press x twice,
then press H.
Resuming Playback from
the Point Where You
Stopped the Disc
(Resume Play)