Filter
Top Products
CMT-DH5BT.GB.3-097-196-11(1)
90
GB
If the BLUETOOTH indicator
is lit
or ashing when a function other than
the Bluetooth function is selected, no
sound is heard through the speakers
or PHONES jack
. Press and hold
BLUETOOTH OPR
for about
2 seconds until the BLUETOOTH
indicator
turns o.
There is no microphone sound.
Press VOLUME +
repeatedly or
turn MIC LEVEL
on the unit
clockwise to adjust the microphone
volume.
Make sure the microphone is
connected to the MIC jack
correctly.
There is severe hum or noise.
A TV or VCR is placed too close to the
unit. Move the unit away from the TV
or VCR.
Move the unit away from the source of
noise.
Connect the unit to a dierent wall
outlet.
Install a noise lter (commercially
available) to the power cord.
The timer does not function.
Check the timer setting and set the
correct time (page 81).
Cancel the Sleep Timer function
(page 81).
The remote does not function.
Remove the obstacles between the
remote and the unit.
Move the remote closer to the unit.
Point the remote at the unit’s sensor.
Replace the batteries (R6/size AA).
Locate the unit away from the
uorescent light.
There is acoustic feedback.
Reduce the volume.
Move the microphone away from the
speakers or change the direction of the
microphone.
The color irregularity on a TV screen
persists.
Turn o the TV set once, then turn it
on aer 15 to 30 minutes. If the color
irregularity still persists, place the
speakers farther away from the TV set.
THEATRE SYNC function does not
work.
If distance between the TV and this
unit is too far, this function may not
work. Install the unit near the TV.