Sony 3-097-196-14(1) Stereo System User Manual


 
CMT-DH5BT.GB.3-097-196-11(1)
114
GB
Eects of other devices
Bluetooth devices and wireless LAN
(IEEE 802.11b/g) use the same frequency
band (2.4 GHz). When using your
Bluetooth device near a device with
wireless LAN capability, electromagnetic
interference may occur. is could result
in lower data transfer rates, noise, or
inability to connect. If this happens, try
the following remedies:
Try connecting this system and
Bluetooth mobile phone or Bluetooth
device when you are at least 10 meters
away from the wireless LAN
equipment.
Turn o the power to the wireless LAN
equipment when using your Bluetooth
device within 10 meters.
Eects on other devices
e radio waves broadcast by this system
may interfere with the operation of some
medical devices. Since this interference
may result in malfunction, always turn
o the power on this system, Bluetooth
mobile phone and Bluetooth device in
the following locations:
In hospitals, on trains, in airplanes,
at gas stations, and any place where
ammable gasses may be present
Near automatic doors or re alarms
Notes
is system supports security functions that
comply with the Bluetooth specication
as a means of ensuring security during
communication using Bluetooth technology.
However, this security may be insucient
depending on the setting contents and
other factors, so always be careful when
performing communication using Bluetooth
technology.
Sony cannot be held liable in any way
for damages or other loss resulting from
information leaks during communication
using Bluetooth technology.
Bluetooth communication is not necessarily
guaranteed with all Bluetooth devices that
have the same prole as this system.
Bluetooth devices connected with this system
must comply with the Bluetooth specication
prescribed by the Bluetooth SIG, Inc., and
must be certied to comply. However, even
when a device complies with the Bluetooth
specication, there may be cases where
the characteristics or specications of the
Bluetooth device make it impossible to
connect, or may result in dierent control
methods, display or operation.
Noise may occur or the audio may
cut o depending on the Bluetooth
device connected with this system,
the communications environment, or
surrounding conditions.