Filter
Top Products
[ Installation ]
56
Step 9: Route and hide the cable through the vehicle to the Vehicle Dock
Hide the FEA cable by properly routing it to your SIRIUS Vehicle Dock (see Figure 35).
Use the cable guides to hold the cable in place until it reaches the inner trim or mould-
ing at the edge of the window. Take advantage of any existing cable channel or wiring
conduit and route the cable around the passenger compartment to the Vehicle Dock.
Take care not pull the cable across sharp edges that could damage it, and keep it away
from areas where it might entangle feet. Coil and secure any excess antenna cable in a
location where it can be hidden and secured (such as under the carpet or floor mat).
Plug the FEA cable into the Vehicle Dock’s FM O
UT connector (see Figure 30, on
page 52).
Figure 35