Filter
Top Products
[ Installation ]
40
4. Press and hold the FM PRESETS button. The InV2’s display will show the FM1
preset frequency (see Figure 20).
Note: FM1 is factory-set to 88.1MHz. This may not be the best frequency for your
area.
5. Press the Select button to select the FM1 preset.
6. Use the Channel UP/DOWN buttons to browse-through the different FM
channels until the channel you saved as a preset in Step 2 on page 39 appears
(see Figure 21).
7. Press the Select button. The new channel will now be the FM1 preset.
To listen to your SIRIUS radio, turn your SIRIUS radio ON, then turn your vehicle’s FM
radio ON and press the SIRIUS preset you set in Step 2, on page 39. You should hear
your SIRIUS radio through your vehicle’s FM radio.
FM Presets
Button
Select
Button
Channel
UP/DOWN
Buttons
Figure 20
Figure 21