Filter
Top Products
Sanyo CRSR-10 User Guide Sanyo CRSR-10 User Guide
Searching for a Channel Preset (P.TUNE Mode)
It is possible to quickly search through all of
your presets using the CHANNEL Button.
1. Press and hold the BAND button to enter the
Preset Tuning Mode (P.TUNE).
2. The bottom right portion of the display will
change to highlight the current preset (bottom
right).
3. Press the CHANNEL Button in either direction
to move up or down through your presets. The
new channel will start to play as soon as you
stop pressing the CHANNEL Button.
• Only stored presets will be displayed,
regardless of what bank they are stored in.
• Presets will be grouped and displayed by
preset bank and number (ex. A-1, A-2...B-1,
B-2...) and rotate all the way around back to
the beginning.
Default Display
Preset Tuning List Mode
The P.TUNE Mode can also be viewed as a list
showing Channel Name, Artist Name, or Song Title
just like in the Channel List Mode:
1. Press and hold the BAND button to enter the
Preset Tuning Mode (P.TUNE) (top right).
2. Press the DISP button for 2-seconds which will
bring up the Preset Tuning List Mode displaying
up to 6 preset channel names.
• Pressing the DISP button while in this mode will
change between Channel Name (right top),
Artist Name (right middle), and Song Title list
modes (right bottom).
• The name field will scroll only if the length of the
artist or song title cannot be viewed in its
entirety.
3. Use the CHANNEL Button to highlight the desired
preset.
4. Push and release the SELECT Button to select the
preset. The channel will change and the display
will revert to the P.TUNE Display.
P.TUNE Display
Setting Channel Presets
You can store up to 20 of your favorite channels as
presets, for quick access. Presets are stored in 2
banks, A and B, each containing 10 channel presets.
1. Press the BAND button to activate the preset bank
you want. The selected bank is shown in the lower
right corner of the Default Screen.
2. Select the channel you want to preset (see Basic
Operation and Changing Channels on page 12).
3. Hold the numbered preset button you want to store
the channel in for at least 2 seconds.
• The selected preset number will flash and then
remain lit on the display to show that it has been
memorized.
• If the preset button already has a channel stored in
it, it will be replaced with the new channel.
Recalling Channel Presets
The 10 presets in the active bank (A or B) can be
selected by pressing the “0” – “9” buttons.
1. Press the BAND button to activate the preset bank
you want. The selected bank is shown in the lower
right corner of the Default Screen.
2. Press the desired preset button “0” – “9” to recall the
preset. The channel will change and the display will
revert to the Default Screen for the new channel.
P.TUNE
Channel Name
List Screen
P.TUNE
Artist Name
List Screen
P.TUNE
Song Title
List Screen
17
16
Preset Tuning
Mode