Filter
Top Products
Sanyo CRSR-10 User Guide Sanyo CRSR-10 User Guide
31
30
the display followed by the alarm options:
• Set Alarm: Use the CHANNEL Button to select
“Set Alarm” From the Alarm Clock Menu. Select
either“ Off” (Default) or “”On” from the Menu and
press the SELECT Button to set the alarm On or
Off.
• Time: Use the CHANNEL Button to select
“Time” from the Alarm Clock Menu. Press the
CHANNEL Button to set the time you want the
CRSR-10 to activate (Default is 12:00 PM). Press
the SELECT Button to store the Alarm Time.
c. Program Alert: When this menu option is
highlighted and selected, you will be able to
program the unit to switch to a selected channel at
a specific time. Press the SELECT Button to enter
the Program Alert Menu, The following adjustment
options are available:
• Program Time/Day: Pressing the CHANNEL
Button toggles between Time and Day. If Time is
selected, use the CHANNEL Button to increase
or decrease the set time from the default value
(12:00 PM). AM or PM will switch automatically
when the AM or PM threshold has been
exceeded.
When the desired time is displayed, press
the SELECT Button. If Day is selected, the
screen displays a list consisting of Monday,
Tuesday, Wednesday, Thursday, Friday,
Saturday, Daily or Sunday. Use the
CHANNEL Button to scroll to the desired
day. Press the SELECT button to select the
desired day.
• Channel Selection: Press the CHANNEL
Button to scroll through a listing of all the
SIRIUS channels. When the desired
channel is highlighted, press the SELECT
Button.
• Program Alert On/Off (Factory Default is
Off): Press the CHANNEL Button to toggle
between On or Off. When the desired
alert status is highlighted, press the
SELECT Button.
d. Auto Shutdown: In this mode, you have the
option of programming the unit to
automatically shut off after a 1-hour period
without any user intervention.
To activate the Auto Shutdown feature, use
the CHANNEL Button to select it from the
Auto Shutdown Menu, press the Knob to
enter the adjustment mode. Once in the
Auto Shutdown Menu, use the CHANNEL
Button to highlight either “Enabled” or
“Disabled”. Press SELECT to change the
Auto Shutdown feature.
• Cancel Auto Shutdown: If you want to
temporarily deactivate the Auto Shutdown
feature once the beep tone sounds,
press the SELECT key. The Auto
Shutdown sequence will revert back to 1-
hour.
e. Sleep Mode: In this mode, you have the
capability of programming the unit to
shutdown after a selected period of time.
The screen displays Sleep Mode on the top
line, with optional time settings as follows:
Off
15 min
30 min
45 min
60 min
Use the CHANNEL Button to select the
desired Sleep Time. When the desired time
is highlighted, press the SELECT Button.
The Receiver will now turn off after the
selected time has expired.