Filter
Top Products
Sanyo CRSR-10 User Guide Sanyo CRSR-10 User Guide
11
10
Sanyo Controls and Features
1. Power Button : Pressing and releasing
turns the CRSR-10 On and Off.
2. CHANNEL Button: Navigates through display
screens and channels. Pressing the right
button increases or moves down in the
menus. Pressing the left button decreases or
moves up in the menus.
3. SELECT Button: Selects of items highlighted
on the display in the Category List Screens,
Channel List Screens, and Menu List
Screens. From the Default Screen the user
can enter a direct channel number using the
keypad. The SELECT button will also bring
the user back to the last channel played.
1
2
3
4
5
6
7
8
9
8. Memory (MEMO) Button (S-SEEK Function): This
feature will allow you to capture and store the
current PDT information (Artist & Song title), with a
storage capacity of up to 10 listings. Once stored,
the receiver will also have the capability to search
the current incoming SIRIUS signal, to cross-
reference with any stored Artist Name/Song title in
the CRSR-10’s memory.
9. BAND Button (P.TUNE): This button switches
between preset banks A, and B, which hold 10
presets each. This button also enables “Preset
Tune Mode”, which allows for viewing and
listening to the stored presets with a press of the
SELECT Button.
4. Category (CAT.) Up/ Down Buttons: Navigates
through the Category List Screen which displays
SIRIUS Channel Categories. The current
Category is highlighted. Pressing again
increments or decrements the Category
highlighted.
5. Display (DISP) Button: Pressing this button from
the Default Screen will take you to the Display
Properties Menu Screen where the options for
“Contrast” and “Brightness” will be offered. From
the Default Screen, this button will also switch to
the Channel List Mode.
6. MENU Button: Used to access menu options to
make set up and feature changes.
7. Preset Number Buttons (0-9): Sets and selects
preset channels. You can store up to 20 favorite
channels.