Filter
Top Products
55
Stereo Mode
Repeatedly, press STEREO. The receiver’s display
shows the following three settings (refer to the
table on page 54):
PURE STEREO - This setting allows you to bypass
DSP processors to enjoy pure high fi delity sound
from 2-channel analog sources. In this setting, the
front speaker size setting is always LARGE.
DSP STEREO/DOLBY STEREO/DTS STEREO - This
setting outputs 2.1-channel signals. If the sub
woofer is set to off , the Front Left and Front Right
speaker setting is always LARGE.
One of the surround modes - This setting selects
one of the surround modes.
STEREO
STEREO