Filter
Top Products
18
S-VIDEO Jack
The video signal is separated into luminance (Y) and color (C) signals
for the S-VIDEO jack. The S-VIDEO signals enable high-quality color
reproduction. If your video component has an S-VIDEO output, we
recommend to use it. Connect the S-VIDEO output jack on your video
component to the S-VIDEO input jack on this unit.
COMPONENT Jack
Make component video connections to a TV or monitor with component
inputs to produce higher quality video images. Use a component video
cable or 3 video cords to connect the component video out jacks on the
receiver to the monitor.
Video Convert
The receiver converts S-Video input signals to a video output signal. For
example, the S-Video input signal can be output to the receiver’s MONITOR
OUT VIDEO jack.
Notes:
• Be sure to connect the left and right audio channels properly. Red
connectors are for the R (right) channel, and white connectors
are for the L (left) channel.
• Be sure to connect the inputs and outputs of the video signals
properly.
• If you connect the S-VIDEO or component signal to the S-VIDEO
or component jack on this unit, it is not necessary to connect
the conventional video signal to the VIDEO (composite) jack. If
you use both video inputs, this unit gives priority to the S-VIDEO
signal.
• Each type of video jack works independently. Signals input to the
VIDEO (composite), S-VIDEO or component jacks are output to
the corresponding VIDEO (composite), S-VIDEO, or component
jacks, respectively.
• You may need to set up the digital audio output format of your
DVD player, or other digital source components. Refer to the
instructions of each component connected to the digital input
jacks.