Filter
Top Products
16
Connecting Digital Audio Components
• There are digital input jacks on the rear panel. You can use these
jacks to input PCM, Dolby Digital and DTS bitstream signals from a
CD, DVD, or other digital source components.
• There is one digital optical output jack on the rear panel. The jack
can be connected to a CD recorder, DVD recorder, or MD deck
inputs, respectively.
• To set up the digital audio format of DVD player, or other digital
sources connected to digital input jacks, refer to the instructions of
each component.
• You can designate the input for each digital input/output jack
according to your component.
Notes:
• There is no Dolby Digital RF input jack. Please use an external RF
demodulator Dolby Digital decoder when connecting the Dolby
Digital RF output jack of the video disc player to the digital input
jack.
• The digital signal jacks on this unit conform to the EIA standard.
If you use a cable that does not conform to this standard, this
unit may not function properly.
• Each type of audio jack works independently. Signals input
through the digital and analog jacks are output through the
corresponding digital and analog jacks, respectively.
• Digital input signals from the coaxial jack are also output from
the optical jack.