Filter
Top Products
MOON Stargate Processor
Full Function Remote Control Programming
Example for Programming a Macro Sequence
To program the M1 button in the AVC mode to power on the receiver, power on the CD, power on the
TV and power on the VCR:
Step 1:
Press the AVC button and MUTE buttons simultaneously. Hold both buttons until the red light
under the AVC button turns on. The red light will blink once during each subsequent press of a
button.
Step 2:
Press the M1 button to select the M1 macro.
Step 3:
Programming the M1 macro button: Press the AVC button to select the AVC Power command.
Press the CD Device button to select the CD mode. Press the MUTE button to select the CD
Power command. Press the TV Device button to select the TV mode. Press the MUTE button to
select the TV Power command. Press the VCR Device button to select the VCR mode. Press the
MUTE button to select the VCR Power command.
Step 4:
Press the CH ! button. The red light under the AVC button will blink twice and then turn off
indicating that the macro sequence has been stored.
____________________________________________________________________________________
Full Function Remote Control Programming 18