Filter
Top Products
38
ENGLISH
SETTING THE OTHERS SETUP
When selecting the SCREEN SAVER
• A TV screen may be burned out if a static picture is displayed for a long time in the stop mode or the pause mode, etc.. To
prevent this, set the SCREEN SAVER to ON. Then the unit automatically activates the screen saver function if a static
picture is displayed for over 5 minutes.
Note :
• The monitor screen of a projector or projection TV is easily burned out if a static picture is displayed for a long time. Be
careful not to allow the monitor screen to be burned out when the SCREEN SAVER is set to OFF.
1
Press the CURSOR / buttons to select the SCREEN SAVER.
Item menu
Setting menu
• SCREEN SAVER : When turning on or off the screen saver function.
• ANGLE MARK : When displaying the angle symbol on the TV screen during
playback at the scene recorded from multiple camera angles.
• DEFAULT : When resetting all the settings made in the setup menu except
the rating level and the password to the default settings.
SCR SAVER
ANGLE MARK
DEFAULT
ON
OFF
MAIN PAGE
-- OTHERS PAGE --
RC
SCR SAVER
ANGLE MARK
ON
OFF
-- OTHERS PAGE --
• ON : When turning on the screen saver function.
• OFF : When turning it off.
4
Press the CURSOR button to select the item menu.
• Each time the CURSOR or button is pressed, the
setting menu or the item menu is selected.
• The selected setting is colored.
• Each time the CURSOR or button is pressed, the
item menu or the setting menu is selected.
RC RC
ENTER
2
Press the CURSOR button to select the setting menu.
3
Press the CURSOR / buttons to select the preferred setting, then press the ENTER button.
RC
RC