Sherwood V-903 CD Player User Manual


 
22
ENGLISH
PLAYING TRACKS IN DESIRED ORDER (CD only)
In the stop mode, press the PROGRAM MODE button.
1
Repeat the above step 2 until the desired tracks are programmed.
3
Then the program mode is displayed on the TV screen.
When the PROGRAM MODE button is pressed again,
the program mode is canceled.
󳂮󳂮
Clearing the programmed tracks
To clear one by one ]
During programming, press the CLEAR button.
[ To clear all programmed tracks ]
During programming or when the STOP(󳂮) button is
pressed to stop program playback, press the PROGRAM
MODE button.
To start program playback, press the PLAY() button or the ENTER button.
4
Select the desired track with pressing the NUMERIC buttons on the remote control.
Example) When the track 5 and 12 are programmed.
2
For 5 :
For 12 :
Playback will start in the programmed order.
After all programmed tracks have been played, it enters
the stop mode without clearing the programmed
tracks.(Program playback is suspended)
Up to 99 tracks can be programmed to be played in any desired order.
PROGRAM 00 P-00
RC
P.MODE
PROGRAM 05 P-01
PROGRAM 12 P-02
Programmed order
Programmed track number
5
2
+10
RC
CLEAR
Each time this button is pressed, the programmed tracks
are cleared one by one in the opposite order.
Once program playback is performed, you cannot clear
one by one.
Then the programmed tracks are all cleared.
Opening the disc tray clears all programmed tracks.
RC
P.MODE
Main unit
RC
RC
oror
ENTER