Sherwood V-903 CD Player User Manual


 
32
ENGLISH
TV ASPECT
SCART VIDEO
PIC MODE
AUTO
HI-RES
N-FLICKER
MAIN PAGE
-- VIDEO PAGE --
AUTO : Select this mode normally. This unit automatically detects source content,
film or video, of playback source, and perform the necessary signal process.
HIGH RESOLUTION : To get better picture resolution, select this mode.
NO FLICKER : To improve flicker of picture, select this mode.
This mode is suitable for playback of video content pictures.
Note:
When there is no improvement of picture quality in the HIGH RESOLUTION mode or
NO FLICKER mode, we recommend you to select the AUTO mode.
When selecting the PICTURE MODE
There are two types of source content in pictures recorded in DVD Videos : film content(pictures recorded from films at 24
frames per second) and video content(video signals recorded at 30 frames per second).
According to the type of content being played back, select the desired picture mode.
Continued
󳂮To return to the main setup menu screen
Press the CURSOR button to select the item menu, press the CURSOR /buttons to select MAIN PAGE and press
the ENTER button.
Then the main setup menu screen will be displayed.
When the RETURN button is pressed repeatedly, the main setup menu screen will be displayed, and then the setup mode is
canceled.
5
Set other setups to your preference.
4
Press the CURSOR button to select the item menu.
Each time the CURSOR or button is pressed, the
setting menu or the item menu is selected.
The selected setting is colored.
Each time the CURSOR or button is pressed, the
item menu or the setting menu is selected.
RC RC
ENTER
RC
RC
2
Press the CURSOR button to select the setting menu.
3
Press the CURSOR /buttons to select the preferred, then press the ENTER button.