Filter
Top Products
33
ENGLISH
SETTING THE AUDIO SETUP
When selecting the AUDIO OUT
Notes :
• This unit can output either analog audio signal or digital audio signal(, not both analog and digital audio signals concurrently).
Therefore, you should set the AUDIO OUT to either ANALOG or coressponding digital out setting(SPDIF/STREAM or
SPDIF/PCM) according to system connections, etc.
• When the DIGITAL OUT of the unit is connected to the DIGITAL IN of an amplifier which does not contain the Dolby Digital or
DTS decoder(which processes the bitstream signal), you should set the AUDIO OUT to SPDIF/PCM to convert Dolby Digital or
DTS bitstream to linear PCM(2 channel) of 48 kHz/16 bit and to output it.
• If the AUDIO OUT is not set correctly, loud noise or no sound may be heard from the speakers, and it may be harmful to your
ears and damage the speakers.
When selecting the DOWNMIX
• Depending on whether the AUDIO OUTs(or the A/V SCART OUTPUT connector) are connected to a stereo
amplifier/receiver/TV or a A/V amplifier/receiver with built-in surround decoder, you should set the DOWNMIX correctly.
Notes :
• This setting is valid when the AUDIO OUT is set to ANALOG.
• The DOWNMIX setting affect only the output signal from the AUDIO OUT jacks(or the A/V SCART OUTPUT connector) when
playing back a DVD Video disc, etc. recorded in multi-channel signal format.
1
Press the CURSOR / buttons to select the preferred item.
• Then the setting menu of the selected item is displayed.
RC
Item menu
Setting menu
• AUDIO OUT : When outputting either analog audio signal or a preferred
digital audio signal format.
• DOWNMIX : When outputting a preferred analog audio signal format.
• AUDIO DRC(Dynamic Range Compression) : When turning on or off the
dynamic range compression that makes faint sound easier to hear at low volume
levels.
AUDIO OUT
DOWNMIX
AUDIO DRC
ANALOG
SPDIF/STREAM
SPDIF/PCM
MAIN PAGE
-- AUDIO PAGE --
AUDIO OUT
DOWNMIX
AUDIO DRC
ANALOG
SPDIF/STREAM
SPDIF/PCM
-- AUDIO PAGE --
• ANALOG : When outputting analog audio signal.
• SPDIF/STREAM : When outputting the digital audio signal as it was recorded.
• SPDIF/PCM : When converting DTS or Dolby Digital bitstream to linear
PCM(2 channel) of 48 kHz/16 bit and outputting it.
AUDIO OUT
DOWNMIX
AUDIO DRC
-- AUDIO PAGE --
LT/RT
LO/RO
• LT/RT : When you enjoy multi-channel surround sound by connecting the unit's
AUDIO OUTs to a A/V amplifier/receiver with built-in surround decoder.
• LO/RO : When you enjoy conventional 2-channel stereo sound by connecting
the unit's AUDIO OUTs to a stereo amplifier/receiver/TV.