Sherwood R-925 Stereo Receiver User Manual


 
Units shipped to countries other than the above
countries are equipped with an AC voltage selector
switch on the rear panel. Refer to the following
paragraph for the proper setting of this switch.
AC VOLTAGE SELECTION
This unit operates on 110-220 V AC. The AC voltage
selector switches on the rear panel are set to the
voltage that prevails in the area to which the unit is
shipped. Before connecting the power cord to your
AC outlet, make sure that the setting position of
these switches match your line voltage. If not, they
must be set to your voltage in accordance with the
following direction.
AC voltage selector switches
Move switch levers to match your line voltage with a
small screwdriver or other pointed tool.
FOR U.S.A. AND CANADA 120 V
Units shipped to the U.S.A. and Canada are
designed for operation on 120 V AC only.
Safety precaution with use of a polarized AC plug.
However, some products may be supplied with a
nonpolarized plug.
CAUTION : To prevent electric shock, match wide
blade of plug to wide slot, fully insert.
ATTENTION : Pour eviter les choc electriques,
introduire la lame la plug large de la borne
correspondante de la prise et poussre jusqu'au fond.
FOR YOUR SAFETY
FOR AUSTRALIA AND EUROPE.....220V/230V/240V
Units shipped to Australia are designed for operation
on 240 V AC only.
To ensure safe operation, the three-pin plug
supplied must be inserted only into a standard three-
pin power point which is effectively earthed through
the normal household wiring. Extension cords used
with the equipment must be three-core and be
correctly wired to provide connection to earth.
Improper extension cords are a major cause of
fatalities. The fact that the equipment operates
satisfactorily does not imply that the power point is
earthed and that the installation is completely safe.
For your safety, if in any doubt about the effective
earthing of the power point, consult a qualified
electrician.
PAN-EUROPEAN UNIFIED VOLTAGE
All units are suitable for use on supplies 220-240 V
AC.
FOR YOUR SAFETY
FOR OTHER COUNTRIES ....................... 110 V/220 V
FOR YOUR SAFETY
AC 220 V AC 110 V
3
ENGLISH
READ THIS BEFORE OPERATING YOUR UNIT