Sherwood R-925 Stereo Receiver User Manual


 
21
󳀏The audio signal from CDP and the video
signal from LDP will be dubbed onto the
tape in VCR 1 and you can enjoy them on
TV set and from the speakers.
Start play on the LDP.
7
Start play on the CDP.
8
Start recording on the VCR 1.
6
Compressing the dynamic range
(Dolby DIGITAL(AC-3) mode only)
󳀏This function compresses the dynamic range of
previously specified parts of the Dolby
DIGITAL(AC-3) sound track(with extremely high
volume) to minimize the difference in volume
between the specified and non-specified parts.
󳀏This makes it easy to hear all of the sound track
when watching movies at night at low levels.
󳀏Then the DYNAMIC RANGE indicator lights up.
󳀏Press again to cancel.
󳀏In some Dolby DIGITAL(AC-3) softwares, this
function may not be used.
DYNAMIC RANGE
OTHER FUNCTIONS
Operating the sleep timer
󳀏The sleep timer allows the system to continue to operate
for a specified period of time before automatically
shutting off.
󳀏To set the receiver to automatically turn off after the
specified period of time.
󳀏When the sleep time is selected, all display panels of
Sherwood components connected by the DIGILINK
are dimly lit.
󳂵10󳂵20󳂵30󳂵60󳂵90󳂵OFF
Unit : Minutes
SLEEP
SLEEP
or
Checking the brightness of the
fluorescent displays
󳀏Each time this button is pressed,
the brightness of all fluorescent
displays of Sherwood
components connected by the
DIGI LINK III changes together
as follows;
ON dim OFF
󳀏In the above step, if it elapses 5 seconds, repeat
again from the step 1.
Memorize it within 5 seconds.
5
MEMO / ENTER
DISPLAY
SYS
󳀏Each time this button is pressed, the sleep time changes
as follows ;
󳀏In the display OFF mode, when any button is pressed,
the receiver switches to the display ON mode.
ENGLISH
VCR1
LDP
SOURCE
REC
VIDEO SOURCE AUDIO SOURCE