Sherwood R-925 Stereo Receiver User Manual


 
ENGLISH
16
LISTENING TO RADIO BROADCASTS
Manual tuning
󳀏Each time this button is pressed, the band is
changed to FM or AM.
󳀏When pressing the BAND button without
selecting the TUNER, the tuner will be selected
automatically and operate.
󳀏Then AUTO appears on the display. The tuner will
now search until a station of sufficient strength has
been found. The display shows the tuned
frequency and TUNED.
󳀏If the station found is not the desired one, simply
repeat this operation.
󳀏Weak stations are skipped during auto tuning.
Frequency direct tuning
Auto tuning
Examples)
󳀏FM 89.10MHz :
󳀏FM 100.70 MHz :
󳀏AM 890 kHz :
󳀏AM 1030 kHz :
󳀏In FM band, If 1 is pressed on the first dight,
10 is entered.
󳀏With the numeric button on the remote control, you
can also enter the frequency.
󳀏In each digit, if it elapses 7 seconds, press the
FREQUENCY DIRECT button again to enter the
frequency.
󳀏Manual tuning is useful when you already know the
frequency of the desired transmitter.
Press TUNING - or + for more than 0.5
second.
3
Select the tuner.
1
Select the desired band.
2
Enter the frequency within 7 seconds for
each digit.
4
Press TUNING - or + repeatedly until the
right frequency has been reached.
3
Enter the frequency direct tuning mode.
3
BAND
TUNING TUNING
TUNING TUNING
FREQ.DIRECT
INPUT SELECTOR/
INDEX
or
TUNER
8 9 1
107
1 0 7
8 9
1 0 3
BAND FREQUENCY