Filter
Top Products
26
80 100 120
(L: Large, S: Small)
• When selecting the type of front speaker,
“FRONT L 10(ft)”
• When selecting the distance of front speaker,
“FRONT L 10(ft)”
• When selecting the type of center speaker,
“CNTR L 10(ft)”
• When selecting the distance of center speaker,
“CNTR L 10(ft)”
• When selecting the type of surround speaker,
“SURR L 5(ft)”
• When selecting the distance of surround speaker,
“SURR L 5(ft)”
• When selecting the type of surround back speaker,
“SURR-B L 5(ft)”
• When selecting the distance of surround speaker,
“SURR-B L 5(ft)”
• When selecting the subwoofer,
“SUB-W Y”
• When selecting the Dolby Virtual delay time,
“NARROW”
• This mode can work only in the Dolby Virtual
mode. In the other surround modes, this setting is
just displayed.
• When selecting the crossover frequency,
“FC 80Hz”
• You can select one of 2 different speaker settings.
L S
• You can select one of 3 different speaker settings.
L S N
• You can select one of 3 different speaker settings.
L S N
• You can select one of 3 different speaker settings.
L S N
• You can adjust the distance within the range of 1 ~
30 feet in 1 foot intervals.
1 (ft) ~ 30 (ft)
• You can adjust the distance within the range of 1 ~
30 feet in 1 foot intervals.
1 (ft) ~ 30 (ft)
• You can adjust the distance within the range of 1 ~
30 feet in 1 foot intervals.
1 (ft) ~ 30 (ft)
• You can adjust the distance within the range of 1 ~
30 feet in 1 foot intervals.
1 (ft) ~ 30 (ft)
Y(es)
N(one)
• When the front speaker is set to “S”, the subwoofer
is automatically set to “Y”.
NARROW : Relatively long distance for the main
listening position to front speakers.
WIDE : Relatively short distance.
(unit : Hz)
When the speaker type is
N , the distance displays -.- .
(L: Large, S: Small, N: None)
Memorize the adjusted speaker settings.
3
T/V
1
234
8765
9
M1 M2 M3
0
+10
MACRO
T/V
1
234
8765
9
M1 M2 M3
0
+10
MACRO
ENTER
MEMO/ENTER
or
• The adjusted speaker settings are
stored in the memory.