Filter
Top Products
To listen with the headphones.
9
• Ensure that the SPEAKER button is set to off.
• When listening to a DTS or Dolby Digital program
source, if the headphones are plugged and the
SPEAKER button is set to off, it enters the 2-CH
downmix mode automatically. (For details, refer to
“Downmixing into 2 front channels”on page 31.)
PHONES
20
When CD, VIDEO 1~3 is selected as an
input source
Select the digital or analog input
connected as desired.
4
• When playing back the program sources with
surround sound, refer to “ENJOYING SURROUND
SOUND” on page 27.
• Each time this button is pressed, the corresponding
input is selected as follows ;
A(nalog) c(oaxial) 1 c(oaxial) 2
o(ptical) 2
o(ptical) 1
• To listen to a DTS or Dolby Digital program source
in the 2-CH downmix mode, in the stereo mode, the
corresponding digital input should be selected. (For
details, refer to “Downmixing into 2 front channels”
on page 31.)
Notes :
• When the selected optical or coaxial digital input is
not connected, the “DIGITAL” indicator flickers,
meaning no sound. (Refer to “ENJOYING
SURROUND SOUND” on page 27.)
• The sound from the component connected to the
selected digital input can be heard regardless of the
selected input source.
Adjust the (overall) volume.
6
Operate the selected component for
playback.
5
• Then “C-EQ OFF” is scrolled.
• Press it again to work, the “C-EQ ON” is scrolled.
• When 96 kHz PCM(2 CH stereo) signals are input,
the cinema EQ function does not work.
To compensate for edgy or shrill movie
sound tracks.
7
• “MUTE” will flicker.
• To resume the previous sound level, press it again.
To mute the sound.
8
DIGITAL
INPUTS
or
DOWN UP
MASTER VOLUME
CINEMA EQ
T/V
1
234
8765
9
M1 M2 M3
0
+10
MACRO
T/VT/V
1
234
8765
9
M1 M2 M3
0
+10
MACRO
MUTE
T/V
1
234
8765
9
M1 M2 M3
0
+10
MACRO
T/V
1
234
8765
9
M1 M2 M3
0
+10
MACRO
VOLUME
ENGLISH