Sharp CD-ES900 Stereo System User Manual


 
CD-ESg00
oo-Es_9Timer and sleep operation (continued)
30
Sleep operation
The radio, compact disc and cassette tape can al! be turned off
automatically.
Play back the desired sound source.
2 Press the CLOCK/TIMER button.
3
Within 1O seconds, press the /
_ or _ _ button to select L _-_ rr m
Z) LCC r
"SLEEP", and press the MEMO-
RY/SET button.
Press the _ _ or _ _ button to select the time.
(Maximum: 3 hours - Minimum: 1 minute)
3 hours - 5 minutes -_ 5-minute intervals
5 minutes - 1 minute _ 1-minute intervals
Press the MEMORY/SET but-
ton. _.
L
C 1_4 I--II--II-3
"SLEEP" will appear. _- s _ .c_c_ ,ca ,.._
The unit will enter the power stand-by mode automatically
after the preset time has elapsed.
The volume will be turned down 1 minute before the steep op-
eration finishes.
To cancel the sleep operation:
Press the ON/STAND-BY button while "SLEEP" is indicated.
To cancel the sleep operation without setting the unit to the stand-by
mode, proceed as follows.
1 While "SLEEP" is indicated, press the CLOCK/TIMER button.
2 Within I0 seconds, press the _1 _,_ or _- _1 button to select
"SLEEP OFF", and press the MEMORY/SET button.
To use timer and sleep operation together
Sleep and timer playback:
For example, you can fall asleep listening to the radio and wake up
to CD in the next morning.
Sleep and timer recording:
For example, you can fall asleep listening to the CD and record radio
programs while sleeping.
I Set the sleep time (see left, steps I - 5).
2 While the sleep timer is set,set the timer playback or recording
(steps 2 - 10, pages 27 - 28).
Timer playback or
Sleep timer setting recording setting
End time
To confirm the remaining sleep time:
t While "SLEEP" is indicated, press the CLOCK/TIMER button.
2 Within I0 seconds, press the I_ _ or _ _ button to select
"SLEEP X : XX".
"X : XX" is sleep remaining time.
The remaining sleep time is displayed for about 10 seconds.
You can change the remaining sleep time while it is displayed by
pressing the MEMORY/SET button (steps 4 - 5).
Sleep operation will Timer playback or recording
automatically stop. start time
Caution:
When using the cassette deck, be sure the tape length is long
enough to perform both functions. If you want to sleep and wake up
listening to a tape, and the length of the tape is shorter than the
sleep timer setting, timer playback or recording wil! not be possible.