Filter
Top Products
CD-ESgO0
CD-ES99
24
Recording on a cassette tape
• Various tape functions
Function Main unit Remote
control
Play
(23
Stop _ []
(23
Fast for- _ ._
ward/Fast I\ _
rewind
(TAPE2only) _ v
(Z)
Operation
Press in the stop
mode.
Press in the playback,
fast forward or fast re-
wind mode.
Press in the playback
or stop mode.
Caution:
• To remove the cassette, press the [] button, and then open the
compartment.
• Before changing from one tape operation to another, press the []
button.
• if a power failure occurs during tape operation, the tape head will
remain engaged with the tape and the cassette door witl not
open. In this case, wait until the power is restored.
Before recording:
• When recording important selections, make a preliminary test to
ensure that the desired material is properly recorded.
• SHARP is not liable fordamage or loss of your recording arising
from malfunction of this unit.
• The volume and sound controls can be adjusted with no effect
on the recorded signal (Variable Sound Monitor).
• For recording, use only normal tapes. Do not use metal or
CrO_tapes.
Erase-prevention tab of cassette tapes:
• When recording on a cassette tape, make sure that the erase-
prevention tabs are not removed. Cassettes have removable
tabs that prevent accidental recording or erasing.
• To protect the recorded sound, remove the tab after recording.
Cover the tab hole with adhesive tape to record on the tape with-
out the tab.
Side A
Tab for side B Tab for side A