Filter
Top Products
CO-Es_CO-ES_00Recording on a cassette tape (continued)
26
Recording from several CDs continuously:
t Perform steps I - 5 in "Recording from a CD (CDs)" on page 25.
2 Within 5 seconds, press the _ / _.
To perform programmed recording:
I Program discs and tracks. (See page 20.)
2 Press the O|l button.
3 Press the I_/_.
To stop recording:
Press the [] button.
The CD and tape will stop.
• Recording from the radio
Tune in to the desired station. (See page 24.)
2 Load a cassette into the TAPE 2 cassette compartment
with the side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
3 Press the _11 button.
Recording wilt be paused. _z,_//.- _:_-"]
4 Press the I_ / r: button to start recording.
To interrupt recording:
Press the ell button.
To resume recording, press the _ / _- button.
To stop recording:
Press the [] button.
Note:
if you hear a whistling noise while recording an AM station, move
the AM loop antenna.
• Dubbing from tape to tape
You can record from TAPE 1 to TAPE 2.
1 Press the ON/STAND-BY button to turn the power on.
2 Load a prerecorded cassette
into the TAPE I cassette com-
partment. Insert a blank tape
into the TAPE 2 cassette com-
partment.
It is recommended that the recording tape is the same length as
the master tape.
3 Press the TAPE (4 -- 2) button until "TAPE 1" appears on
the display.
4 Press the ®H button.
Recording wil! be paused. _ , i _. 2:_-"
/TF_'*"
5 Press the _" / _, button to start dubbing.
To stop dubbing:
Press the m button.
TAPE I and TAPE 2 wil! simultaneously stop.
• Erasing recorded tapes
1 Load the tape to be erased into the TAPE 2 cassette compart-
ment with the side to be erased facing toward you.
2 Press the TAPE (I -- 2) button until "TAPE 2" appears on the dis-
play.
3 Press the ®1111button.
4 Press the _" / button to start erasing.
Note:
Make sure that the TAPE 1 is not in use.