Sharp CD-ES900 Stereo System User Manual


 
CD-ESg00
CD-ES99
12Whenthe preset time is reached, playback or recording will
start.
The volume will increase gradually until itreaches the preset
volume.
13When the timer end time is reached, the system will enter
the power stand-by mode automatically.
Once timer:
The timer will be canceled.
Daily timer:
The timer will operate at the same time every day. itwill contin-
ue untilthe daily timer setting is canceled. Cancel the daily timer
when it is not used.
Note:
When performing timer playback or recording using another unit con-
nected to the GAME INPUT jacks, select "GAME" in step 9.
This unitwil! turn on or enter the power stand-by mode automatically,
however, the connected unit will not turn on or off.
Checking the timer setting in the timer stand-by mode:
t Press the CLOCK/TIMER button.
2 Within I0 seconds, press the I_ _ or _ _ button to select
"ONCE" or "DAILY", and press the MEMORY/SET button.
3 Within I0 seconds, press the M_ _ or _,_ _=,_1button to select
"ONCE CAL" or "DAILY CAL", and press the MEMORY/SET but-
ton.
The unit returns to the timer stand-by mode after displaying the
settings in order.
Canceling the timer setting in the timer stand-by mode:
I Press the CLOCK/TIMER button.
2 Within I0 seconds, press the _ _1_ or _ _ button to select
"ONCE" or "DAILY", and press the MEMORY/SET button.
3 Within I0 seconds, press the I,_,,q_ or _- _'_1 button to select
"ONCE OFF" or "DAILY OFF", and press the MEMORY/SET but-
ton.
Timer will be canceled (the setting will not be canceled).
Reusing the memorized timer setting:
The timer setting will be memorized once it is entered. To reuse the
same setting, perform the following operations.
I Turn the power on and press the CLOCK/TIMER button.
2 Within I0 seconds, press the I'q,,_,_ or _ _ button to select
"ONCE" or "DAILY", and press the MEMORY/SET button.
3 Within I0 seconds, press the _ _ or _'_ _-_ button to select
"ONCE ON" or "DALLYON", and press the MEMORY/SET button.
4 Press the ON/STAND-BY button to enter the power stand-by
mode.
Note:
The timer can also be set with the remote control.
29