Sharp MD-E9000H Stereo Equalizer User Manual


 
46
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
References
- Error Messages -
Error Messages
Error messages
BLANK MD
Can’t COPY
Can’t EDIT
Can’t READ
(
:Number or
symbol)
Can’t REC
Can’t WRITE
DISC FULL
Er-CD 20
Er-MD
( :Number or
symbol)
EDIT OVER
MD NO DISC
CD NO DISC
Remedy
Replace it with another disc.
Replace the CD.
Change the stop position of the
track and then try editing it.
Replace it with another disc.
Erase the disc and try record-
ing again.
Re-record or replace the
MiniDisc.
Set this unit to the stand-by
mode and try to write the
TOC again. (Remove any
source of shock or vibration
whilst writing.)
Replace the disc with another
recordable disc.
Set this unit to the stand-by
mode and turn the power on
again.
Set this unit to the stand-by
mode and turn the power on
again.
Decrease the number of
tracks.
Replace it with a disc that has
enough time to record.
Load a MiniDisc.
Reload the MiniDisc.
Load a CD.
Reload the CD.
Meaning
Nothing is recorded.
(Neither music nor disc name
is recorded.)
You tried to record from a
copy prohibited CD.
A track cannot be edited.
The disc is damaged.
TOC information cannot be
read.
MiniDisc not specified.
Recording cannot be per-
formed correctly due to vibra-
tion or shock in the unit.
The TOC information could
not be created properly due
to a mechanical shock or to
scratches on the disc.
The disc is out of recording
space.
The CD cover is not working
properly.
MiniDisc is not working prop-
erly.
You chose 21 or more tracks
for track editing.
The remaining time available
for recording is short.
A MiniDisc has not been
loaded.
The MiniDisc data cannot be
read.
A CD has not been loaded.
The CD data cannot be read.
When an error message is displayed, proceed as follows:
Meaning
The number of characters for
the disc name or track name
exceeds 40.
The data recorded on this
disc is not audio data.
You tried to record on a play-
back-only disc.
The disc is write protected.
The temperature is too high.
TOC information recorded on
the MD does not match the
MiniDisc specifications or it
cannot be read.
There is no space left for re-
cording track numbers.
There is no space left for re-
cording character informa-
tion.
The data contains an error.
MiniDisc not specified.
MiniDisc is not working prop-
erly.
Tuner is not working properly.
Error messages
NAME FULL
NOT AUDIO
PLAYBACK MD
PROTECTED
TEMP OVER
TOC FORM
( :Number or
symbol)
TOC FULL
TOC FULL1
? MD DISC
POWER?
ER-TU
(
:Number or
symbol)
Remedy
Shorten the disc or track
name.
Select another track.
Replace the disc.
Replace it with another re-
cordable disc.
Move the write protection tab
back to its original position.
Set this unit to the stand-by
mode and wait for a whilst.
Replace it with another disc.
Erase the disc and try record-
ing again.
Replace it with another re-
cordable disc.
Replace it with another re-
cordable disc.
Erase the needless charac-
ters.
Replace it with another disc.
Set this unit to the stand-by
mode and turn the power on
again.
Set the unit to the stand-by
mode and turn the power on
again.
*MD9000H-E44-48 2001.4.20, 2:16 AM46