Sharp MD-E9000H Stereo Equalizer User Manual


 
16
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
CD Playback
- Listening to a CD -
To locate the beginning of a track
To move to the beginning of the next track:
Press the 4 button for less than 0.5 seconds during playback.
You can skip to any track by pressing the
4
button repeatedly until the de-
sired track number appears.
To restart the track being played:
Press the 5 button for less than 0.5 seconds during playback.
You can skip to any track by pressing the
55
55
5 button repeatedly until the de-
sired track number appears.
To locate the desired portion
For audible fast forward:
Press and hold down the
44
44
4
button during playback.
For audible fast reverse:
Press and hold down the
55
55
5
button during playback.
Notes:
Normal playback will resume when the
5
or
4
button is released.
When the end of the last track is reached during fast forward, “END” will appear
on the display and CD operation will be paused. When the beginning of the first
track is reached during fast reverse, playback will start automatically.
The
5/3
or
2/4
button on the remote control allows you the same opera-
tions.
Listening to a CD (continued)
To remove the CD:
Whilst in the stop mode, press the CD
7
(OPEN/CLOSE) button.
Press the CD eject button and remove the CD.
Notes:
After removing the CD, make sure to press the CD
7
(OPEN/CLOSE) button and
close the CD compartment.
When the unit enters the stand-by mode, the opened CD compartment cover will
be closed automatically.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
Caution:
Do not open or close the CD compartment cover manually. It may cause
malfunctions to the unit.
Be careful not to jam your fingers in the CD compartment cover.
If the power fails whilst the compartment is open, wait until the power is restored.
If a disc is damaged, dirty, or loaded upside down, “CD NO DISC” will appear on
the display.
Keep foreign objects out of the CD compartment.
Subjecting the unit to shock or vibration may cause mistracking.
When the unit is not being used, be sure to close the CD compartment. If it is left
open, the lens may be covered with dust and the unit may not operate properly.
If TV or radio interference occurs during CD operation, move the unit away from
the TV or radio.
CD Eject Button
PUSH
*MD9000H-E15-16 2001.4.20, 2:06 AM16