Filter
Top Products
05/2/2 HT-X1W(LA)E6.fm
E-52
ENGLISH
TINSZA048AWZZ
HT-X1W
7
Advanced Features
Notes:
!
You cannot change the amplifier settings unless the input source
is set to DVD/CD.
!
The amplifier settings cannot be changed in the tuner mode and
do not affect the tuner sound.
" Speaker delay setting
When some of the speakers are at a different distance from the lis-
tening point, you can select the speaker delay to make it seem as
though the speaker distances are the same.
Note:
The speaker delay setting is not available when the surround is
"STEREO" or "VIRTUAL (SURROUND)".
In the stop mode, you can change the amplifier settings on the
TV screen.
1
Press the SET UP AMP but-
ton.
The amplifier setting screen
appears.
2
Press the or button to select the menu and press the
ENTER button.
3
Press the , , or button
to change the setting.
Repeat the operation as instructed.
(The number of repetition depends on the setting item.)
To change other settings, begin from step 2.
4
Press the RETURN button twice.
The setting is complete.
Speaker Delay
Amplifier Setup
Speaker Level
Test Tone
Select Enter Return
ENTER
Front
Speaker Delay
Center
Front
Select
Change
Return
Surround
Surround L
2.0 M
R
2.0 M
R
2.0 M
2.0 M
L
2.0 M
1
Press the SET UP AMP button.
2
Within 10 seconds, press the or
button to select "SP DELAY",
and then press the ENTER button.
3
Within 10 seconds, press the or
button to select the desired
speaker.
The indicator of the selected speaker
flashes.
4
Within 10 seconds, press the or
button to select the distance.
!
You can change the distance in
0.1 m steps.
!
To set the distance of other speak-
ers, repeat the operation from step
3.
5
Press the RETURN button twice.
The setting is complete.
Speaker Delay
Amplifier Setup
Speaker Level
Test Tone
Select Enter Return
ENTER
Front
Speaker Delay
Center
Front
Select
Change
Return
Surround
Surround L
2.0 M
R
2.0 M
R
2.0 M
2.0 M
L
2.0 M
Front
Speaker Delay
Center
Front
Select
Change
Return
Surround
Surround L
2.0 M
R
3.3 M
R
2.0 M
2.0 M
L
2.0 M