Filter
Top Products
05/2/2 HT-X1W(LA)E2.fm
E-17
ENGLISH
TINSZA048AWZZ
HT-X1W
Preparation for Use
System connections (continued)
! Connecting the system connection cable
Connect the main unit and subwoofer/amplifier unit as follows.
! Aerial connection
Note:
Placing the aerial on the system or near the AC power lead may cause
noise pickup. Place the aerial away from the system for better reception.
Installing the AM loop aerial:
External FM or AM aerial:
Use an external FM or AM aerial if you require better reception.
Consult your dealer.
When using an external AM aerial, be sure to keep the wire of the
AM loop aerial connected.
Subwoofer/
amplifier unit
1
2
Main unit
1
2
Black
Blue
Blue Black
Aerial terminals
Supplied FM aerial:
Connect the FM aerial wire to the FM 75
OHMS socket and position the FM aerial
wire in the direction where the strongest
signal can be received.
Supplied AM loop aerial:
Connect the AM loop aerial wire to the
AM and GND terminals. Position the AM
loop aerial for optimum reception. Place
the AM loop aerial on a shelf, etc., or at-
tach it to a stand or a wall with screws
(not supplied).
< Assembling > < Attaching to the wall >
Wall Screws (not supplied)
FM
aerial
AM loop
aerial
AM loop
aerial
External AM aerial
15 m (49 feet)
7.5 m
(25 feet)
External
FM aerial
Earth wire
Earth rod
1
SHARP TINSZA048AWZZ (LA)