Filter
Top Products
E-20
HTCN400_500DVH_E.fm03/7/2
HT-CN400DVH
ENGLISH
92LCN400E0270
F
S
V
I
N
P
E
D
HT-CN500DVH
Preparation for Use
- Changing the setup menu -
!
TV display setting
Note:
When playing the disc with a fixed video format, it will not change even if the TV
screen size is changed.
!
TV type setting
!
Video output setting
Indicator Setting
NORMAL/PS When playing a wide image (16:9) disc,
the left and right sides of the image are
cut (pan scan) to display a natural-look-
ing 4:3 size image.
A wide image disc without pan scan
is played back in 4:3 letterbox.
A 4:3 disc is played in 4:3.
NORMAL/LB When playing a wide image (16:9) disc,
black bands are inserted at the top and
bottom and you can enjoy full wide im-
ages (16:9) on a 4:3 size TV.
A 4:3 disc is played in 4:3.
WIDE A wide image (16:9) is displayed when
playing a wide image (16:9) disc.
"
When playing a 4:3 image disc, the image size depends on the
setting of the connected TV.
"
If you play back a wide image (16:9) disc with this unit connected
to a 4:3 TV, the vertically shrunk image is displayed.
Indicator Setting
MULTI Select this mode for the multi-system TV.
NTSC Select this mode for the NTSC TV.
PAL Select this mode for the PAL TV.
1
Select "GENERAL SETUP" on the setup menu
screen (see steps 1 - 3 on page 17).
2
After selecting "VIDEO OUTPUT" in step 4 on
page 17, select "S-VIDEO" or "SCART" and
press the ENTER button.
Indicator Setting
S-VIDEO Sending video signals from an S-VIDEO OUTPUT socket.
SCART Sending video signals from a SCART OUTPUT socket.
SETUP MENU -- MAIN PAGE
SPEAKER SETUP
AUDIO SETUP
EXIT SETUP
PREFERENCES
GENERAL SETUP
-- GENERAL PAGE --
TV TYPE
MAIN PAGE
OSD LANG
SCR SAVER
TV DISPLAY
S-VIDEO
SCART
VIDEO OUTPUT