Filter
Top Products
E-11
Listening to a CD or MP3/WMA disc
This system can play back a standard CD, CD-R/RW in the
CD format and CD-R/RW with MP3 or WMA files, but
cannot record on them. Some audio CD-R and CD-RW
discs may not be playable due to the state of the disc or the
device that was used for recording.
MP3:
MP3 is a form of compression. It is an acronym which stands
for MPEG Audio Layer 3. MP3 is a type of audio code which
is processed by significant compression from the original
audio source with very little loss in sound quality.
●
This system supports MPEG 1 Layer 3 and VBR files.
●
During VBR file playback, time counter in the display may
differ from its actual playback time.
●
Bitrate which is supported by MP3 is 32 ~ 320 kbps.
WMA:
WMA files are Advanced System Format files that include
audio files which are compressed with Windows Media
Audio codec. WMA is developed by Microsoft as an audio
format file for Windows Media Player.
●
“MP3” and “WMA” indicator will light up after the unit reads
information on an MP3 or WMA disc.
●
Bitrate which is supported by WMA is 64 ~ 160 kbps.
Caution:
●
Do not place two discs in the disc compartment.
●
Do not play discs of special shapes (heart, octagon, etc). It
may cause malfunctions.
●
Do not push the disc compartment while it is moving.
●
If the power fails while the compartment is open, wait until the
power is restored.
●
If TV or radio interference occurs during CD operation, move
the unit away from the TV or radio.
●
Be sure to place 8 cm (3") disc in the middle of the disc
compartment.
●
Due to the structure of the disc information, it takes longer to
read an MP3/WMA disc than a normal CD (approximately 20
to 90 seconds).
Notes for CD or MP3/WMA disc:
●
When the end of the last track is reached during fast forward,
“END” will appear on the display and CD operation will be
paused. When the beginning of the first track is reached during
fast reverse, the unit will enter the playback mode (only for CD).
●
Rewritable multi-session discs with unfinished writing, can
still be played.
Advanced CD or MP3/WMA disc playback
By using the Numeric buttons, the desired tracks on the
current disc can be played.
Use the Numeric buttons on the remote control to select
the desired track while playing the selected disc.
●
The Numeric buttons allow you to select up to number 9.
●
When selecting number 10 or higher, use the “10+” button.
■ Disc playback
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD/USB button on the remote control or FUNCTION
button repeatedly on the main unit to select CD function.
3
Press the OPEN/CLOSE button to open the disc compartment.
4
Place the disc in the disc compartment, label side front.
5
Press the OPEN/CLOSE button to close the disc compartment.
6
Press the / (CD / ) button to start playback. After the
last track is played, the unit will stop automatically.
■ Various disc functions
Function Main
unit
Remote
control
Operation
Play
Press in the stop mode.
Pause
Press in the playback
mode. Press the /
button to resume
playback from the
paused point.
Stop
Press in the playback
mode.
Track
up/
down
Press in the playback or
stop mode.
If you press the button in
the stop mode, press the
/ button to start the
desired track.
Fast
forward/
reverse
Press and hold down in
the playback mode.
Release the button to
resume playback.
■ Direct track search