Filter
Top Products
E-10
Listening to the iPod, iPhone or iPad
(continued)
For iPod nano or iPod touch :
For additional support, apply dock spacer (supplied) as shown.
Note:
When navigating the iPod, iPhone or iPad menu with remote
control, do not operate any of the buttons on the iPod or iPhone
unit. The volume level is adjusted by pressing the VOL (+ or –)
button on the main unit or the remote control. Adjusting the
volume on the iPod, iPhone or iPad units give no effect.
iPod, iPhone and iPad operations:
The operations described below depend on the generation iPod,
iPhone and iPad you are using.
System on operation:
When the main unit is powered on, the iPod, iPhone or iPad units
will automatically power on when docked or connected in the unit.
System off (stand-by operation):
When the main unit is turned to stand-by mode, the docked iPod,
iPhone or connected iPad unit will automatically turn to stand-by
mode.
Simply remove the iPod or iPhone from the docking station
or iPad connector from USB terminal. It is safe to do so
even during playback.
Caution:
● Unplug all accessories for the iPod or iPhone before
inserting it into the docking station.
● Stop button ( ) at main unit is invalid during iPod
function.
1 Peel off the double sided tape separator.
2
Place the spacer between the two ribs of the iPod docking
cover as shown.
■ iPod or iPhone playback
1
Press the ON/STAND-BY button to turn the power on.
2
Press the iPod button on the remote control or FUNCTION
button repeatedly on the main unit to select iPod function.
3
Insert iPod or iPhone unit into the dock of main unit. “DOCK
OK” will appear.
4
Press the / (iPod / ) button to start playback.
■ Navigating the iPod, iPhone or iPad
menus
1
Press the iPod MENU button to view the menu on iPod,
iPhone or iPad unit. Press it again to go back to previous
menu.
2
Use the PRESET ( or ) button to select an item on the
menu and then press ENTER button.
Rib
iPod
docking
cover
Dock spacer
Peel off
separator
■ To disconnect iPod, iPhone or iPad
■ Various iPod, iPhone and iPad functions
Function Main unit Remote control Operation
Dock/USB Dock USB
Play
Press in the pause
mode.
Pause
Press in the
playback mode.
Track up/
down
Press in the
playback or pause
mode.
If you press the
button in the pause
mode, press the /
button to start the
desired track.
Fast
forward/
reverse
Press and hold
down in the
playback mode.
Release the button
to resume
playback.
Repeat
____
Press to toggle
repeat mode.
Shuffle
Press and hold
to toggle shuffle
mode.
Menu
____
Press to view the
iPod menu during
iPod function.
Enter
____
Press to confirm
the selection.
Cursor
Up/Down
____
Press to select the
iPod menu.