Filter
Top Products
33
AN-PR1000_EN.fm06/3/14
AN-PR1000H
TINSEA127AWZZ
2
3
4
5
6
7
8
1
Advanced Features
Setting the sleep timer
You can set the unit to the power stand-by mode at the specified time.
Caution:
This unit cannot set the sleep timer of other equipment.
To use the sleep timer using other equipment, you should also set the
timer on the equipment separately.
To confirm the remaining sleep time:
To cancel the sleep operation:
Press the ON/STAND-BY button whilst "SLEEP" is indicated.
To cancel the sleep operation without setting the system to the stand-by mode, pro-
ceed as follows.
To use timer and sleep operation together
You can fall asleep and wake up to the radio.
1 During playback, hold down the SHIFT button and press the TIMER
button.
2 Within 10 seconds, hold down the SHIFT button and press the or
button to select "SLEEP SET", and press the ENTER button.
3 Press the SHIFT and or but-
tons to select the time.
(Maximum: 2 hours - Minimum: 1 minute)
2 hours - 5 minutes 5-minute intervals
5 minutes - 1 minute 1-minute intervals
4 Press the SHIFT and ENTER
buttons.
"SLEEP" will appear.
5 The unit will enter the power stand-by mode automatically after the
preset time has elapsed.
The volume will be turned down 1 minute before the sleep operation finishes,
and then you cannot change the volume.
1 Whilst "SLEEP" is indicated, hold down the SHIFT button and press the TIMER
button.
2 Within 10 seconds, press the SHIFT and or buttons to select "SLEEP".
The remaining sleep time is displayed for about 10 seconds.
You can change the remaining sleep time whilst it is displayed by pressing the
SHIFT and ENTER buttons (steps 3 - 4).
1 Press the SHIFT and TIMER buttons.
2 Within 10 seconds, press the SHIFT and or buttons to select "SLEEP OFF",
and press the SHIFT and ENTER buttons.
1 Set the sleep timer (steps 1 - 4).
Sleep operation starts.
2 Set the timer playback.
("Setting the timer" on page 32, steps 1 - 7)
Remaining sleep time
Sleep timer setting
Timer playback setting
Timer playback
starts.
Timer playback will
automatically stop.
Sleep operation will
automatically stop.
Sleep operation
starts.
Desired time1minute - 2hours
Start time Finish time
1 minute - 2 hours
1
2