Filter
Top Products
AN-PR1000_EN.fm06/3/14
TINSEA127AWZZ
10
AN-PR1000_EN.fm06/3/14
AN-PR1000H
TINSEA127AWZZ
Preparation for Use
System connections
Installing the main unit and the subwoofer
1. Pull up both speakers outwards.
2. Pre-faster the screw to the speaker box.
3. Snap the metal frame onto the screw and fasten the screw fully. Then turn the unit.
4. Stick the metal frame cushion onto the metal frame and place the glass shelf on top
of it.
Notes:
It is advisable for the top glass cover to be carried by 2 persons.
Top glass with sticker on its surface, must face outwards.
Aerial connection
Note:
Placing the aerial on the unit or near the AC power lead may cause noise pickup.
Place the aerial away from the unit for better reception.
External FM aerial
Use an external FM aerial if you require better reception. Consult your dealer.
Note:
When an external FM aerial is used, disconnect the supplied FM aerial wire.
Top glass cover cushion
Metal frame cushion
Glass shelf
Top glass cover
Sticker up side
Sticker up side
Supplied FM aerial:
Connect the FM aerial wire to the FM 75 OHMS socket
and position the FM aerial wire in the direction where
the strongest signal can be received.
FM
aerial
External
FM aerial
75 ohms
coaxial cable