Sharp 10P02-MA-NM Home Theater System User Manual


 
6
Precautions
General
Keep the unit away from direct sunlight, strong magnetic fields, excessive dust, humidity and electronic/electrical equipment
(home computers, facsimiles, etc.) which generate electrical noise.
If the unit does not work properly, unplug and plug it in again. Then turn on the unit.
In case of an electrical storm, unplug the unit for safety.
Hold the AC power plug by the head when removing it from the AC outlet, as pulling the cord can damage internal wires.
Do not remove the outer cover, as this may result in electric shock. Refer internal service to your local SHARP service facility.
The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, tablecloths,
curtains, etc.
Attention should be drawn to the environmental aspects of battery disposal.
Do not place anything on the top of this system.
WARNING
The voltage used must be the same as that specified by this product. Using this product with a higher voltage than that
specified is dangerous and may result in a fire or other types of accident, causing damage. SHARP will not be held responsible
for any damage resulting from the use of this unit with a voltage other than that specified.
Ventilation
This unit is fitted with a cooling fan at the rear for improved cooling. To allow for proper ventilation and to maintain good airflow
around the main unit, position it with at least 2" (5 cm) of space on all side.
Cooling fan
Rear view
CAUTION
The unit will get warm while being used. Do not touch the warm areas of the unit for prolonged periods to avoid damage to
you.
This unit is equipped with a special function which protects the amplifier circuit from damages. When it is activated, the sound
switch is turned off. In this case, set the unit to the stand-by mode and turn on again.
Volume control
The sound level at a given volume setting depends on speaker efficiency, location and various other factors. It is advisable to
avoid exposure to high volume levels, which occurs while turning the unit on with the volume control setting up high, or while
continually listening at high volumes.