Sharp 10P02-MA-NM Home Theater System User Manual


 
71
Settings
SETTINGS
Communication Setup
This allows you to perform and/or change the
communication setting. This setting is required to use
BD-LIVE functions, the RSS reader function, Netflix
and software updates that connect to the Internet.
NOTE
Make sure that the LAN cable is connected to this system.
(See page 32.)
For manually performing the setting, the following
information of the connected router or modem is required.
Confirm the information prior to the setting.
IP address, netmask, gateway, DNS address
Besides, if specifying a proxy server, the following
information specified from your Internet service provider is
also required. Confirm the information prior to the setting.
IP address and port number of the proxy server
Netflix is not available when a proxy server is used for an
Internet connection. (See pages 53-54.)
Buttons under the cover
Press BD/AUX repeatedly to select DISC
function.
The same operation can be performed by pressing
SELECTOR repeatedly on the main unit.
Press HOME to display the menu screen.
Press a/b to select “Settings”, then press d or
ENTER.
Press a/b to select “Communication Setup”,
then press d or ENTER.
Press ENTER, then press a/b to select
“Change”, then press ENTER again.
Current Ethernet setup info.
: Auto Setup
: Auto Setup
: Auto Setup
: Auto Setup
: Not Use
IP Address
Netmask
Gateway
DNS
Proxy
Change
Initialize
For initializing the current setting, select “Initialize”,
then press ENTER.
1
2
3
4
5
For setting the IP address, press c/d to select
“Yes” or “No”, then press ENTER.
Do you obtain the IP address
automatically?
IP Address
Netmask
Gateway
Next
Yes No
If selecting “Yes”: The IP address is automatically
obtained.
If selecting “No”: The IP address, netmask and
gateway are manually entered using the screen for
inputting characters. (See page 73.)
Regarding each of the setup values, confirm the
specifications of your broadband router.
Select “Next”, then press ENTER.
If selecting “Yes” in the step 6, go to the step 10.
Enter your DNS address.
Enter your DNS address.
Primary
Secondary
Next
The primary and secondary DNS addresses are
entered using the screen for inputting characters. (See
page 73.)
Regarding each of the setup values, confirm the
specifications of your broadband router.
Select “Next”, then press ENTER.
For setting the proxy server, press c/d to
select “Yes” or “No”, then press ENTER.
Do you use the proxy server?
Address
Port
Next
Yes No
If selecting “Yes”: The IP address or proxy server
name and port number for the proxy server specified
from your Internet service provider are entered using
the screen for inputting characters. (See page 73.)
If selecting “No”: Go to the next step.
Select “Next”, then press ENTER.
6
7
8
9
10
11
(Continued on the next page)