Sharp 10P02-MA-NM Home Theater System User Manual


 
32
Broadband Internet Connection
Connecting to the ETHERNET terminal
By connecting this system to the Internet, you can enjoy a variety of content on your TV using BD-LIVE
functions, the RSS reader function and Netflix.
This system can update the software from Sharp’s server using the Internet.
When using the Internet, a broadband Internet connection as shown below is required.
STEPS
1: Be sure to turn off this system and the equipment before making any connections.
2: Firmly connect a LAN cable (commercially available) to the ETHERNET terminal (1 and 2).
Main Unit
LAN
LAN cable
(commercially available)
Internet Modem Hub or broadband router PC
To ETHERNET
terminal
1
To LAN terminal
2
Example of a Broadband Internet Connection
Perform the communication settings. (Pages 71-73)
When enjoying online service (BD-LIVE, RSS, Netflix), refer to BD-LIVE function (pages 47-48), the RSS reader function
(page 37) or Netflix (pages 53-54).
To update the software via the Internet, perform Software Update Settings. (Pages 75-76)
After connecting
CAUTION
When using a broadband Internet connection, a contract
with an Internet service provider is required. For more
details, contact your nearest Internet service provider.
Refer to the operation manual of the equipment you have
as the connected equipment and connection method may
differ depending on your Internet environment.
NOTE
Use a LAN cable/router supporting 10BASE-T/100BASE-
TX.
SHARP cannot guarantee that all brands’ hubs will operate
with this system.