Sharp 10P02-MA-NM Home Theater System User Manual


 
60
Supported iPod
This system is compatible with the following iPod models.
ε
iPod nano (software 1.2 above)
ε
iPod mini (software 1.2 above)
ε
iPod (5th generation) (software 1.3 above)
ε
iPod (4th generation) (software 3.0.2 above)
ε
iPod nano (2nd generation) (software 1.0.0
above)
ε
iPod nano (3rd generation) (software 1.0.3
above)
ε
iPod nano (4th generation) (software 1.0.3
above)
ε
iPod classic (software 1.0.3 above)
ε
iPod touch (software 1.1 above)
ε
iPod touch (2nd generation) (software 2.1
above)
NOTE
Please update your iPod unit to the latest software version
before using it. Please visit Apple’s homepage to download
the latest version for your iPod.
Unplug all accessories for the iPod before connected to the
main unit.
Once connected to the main unit, the iPod will begin the
charging.
The iPod unit cannot be charged while the main unit is in
the stand-by mode.
System on operation
When the main unit is powered on, the iPod unit will
automatically power on when connected to the unit.
* Invalid for 3rd iPod Generation.
System off (stand-by operation)
When the main unit is turned to stand-by mode, the
iPod unit will automatically turn to stand-by mode.
Listening to the iPod
Connecting the iPod
See page 30 to connect the iPod cable to the main unit.
How to connect the iPod cable
Insert the connector into the terminal of the iPod.
How to disconnect the iPod cable
Push both sides (indicated by the arrows shown below) of
the connector.
Pull out the connector from the terminal of the iPod.
1
2