Sharp 10P02-MA-NM Home Theater System User Manual


 
44
AQUOS LINK Control
Watching TV with AQUOS LINK
Use the remote control of the AQUOS TV and point it
towards the AQUOS TV for operation.
The operations and displays may differ from those on
this page depending on the model of the AQUOS LINK-
compatible TV used with this system. Refer also to the
operation manual of your AQUOS TV for the operations
and displays.
Listening to the sound of the
AQUOS TV through this system
You can opt to listen to the TV sound only from this
system.
Press TV POWER to turn on the AQUOS TV.
Open the remote control’s flip cover.
Press OPTION.
The AQUOS LINK menu screen appears.
Example of screen on AQUOS TV
Recorder EPG
Top menu/title list
Media change
By AQUOS AUDIO SP
By AQUOS SP
Sound mode change
Setup menu
Model select
AQUOS LINK
Press a/b to select “By AQUOS AUDIO SP”,
then press ENTER.
The sound from the TV speaker and headphone
terminal is silenced and only the sound from this
system is audible.
Press OPTION.
The AQUOS LINK menu screen disappears.
If you press the button while the menu screen is off,
the menu screen will appear. Press the button once
more to turn the menu screen off.
1
2
3
4
5
Listening to the sound through the
AQUOS TV sound reproduction
You can opt to listen to the TV sound only from the
AQUOS TV.
Select “By AQUOS SP” in Step 4 above, then
press ENTER.
This system goes into mute mode.
Using this system to enjoy the
sound of your AQUOS TV
Turning on/off the system
Pressing TV POWER to turn on/off the AQUOS TV
also turns on/off the system.
Adjusting the audio
You can use VOL +/-, MUTE, and AUDIO to adjust
the volume, mute the sound, and change the audio
setting of this system.
Changing the sound mode
You can use the AQUOS LINK menu to change the
sound mode of this system.
Press OPTION.
The AQUOS LINK menu screen appears.
Press a/b to select “Sound mode change”,
then press ENTER.
Each time ENTER is pressed, the setting changes as
follows:
STANDARD CINEMA NEWS MUSIC JAZZ
DIRECT NIGHT SPORTS ROCK CLASSIC
See page 65 for details on each sound mode.
Press OPTION.
The AQUOS LINK menu screen disappears.
Using the TV remote control to
control playback
Pressing the playback button on the remote control
of an AQUOS LINK-compatible TV plays back a disc
loaded in the system.
For information on playback operations, see the operation
manual of your AQUOS LINK-compatible TV.
Pressing STOP on the remote control of an
AQUOS LINK-compatible TV stops playback.
NOTE
Some functions may not be available depending on the TV.
1
2
3