Filter
Top Products
-E27-
Programmed Playback [CD]
Up to 20 selections can be programmed.
Programming procedure
1. Press [PROGRAM/RANDOM] twice in the stop mode.
• “Program Mode” screen appears on the TV screen.
• “-- Pr. 1” appears, and “PROG.” blinks on the display.
2. Press the number buttons to select the track number.
Example:
To select Track No.3, press [0], then [3].
To select Track No.10, press [1], then [0].
To select Track No.24, press [2], then [4].
Notes:
• If you make a mistake, press [CLEAR].
• To quit the “Program Mode” screen, press [PROGRAM/
RANDOM].
3. Press [p] to move the highlighted box down.
Example:
4. Repeat steps 2 and 3 as above to select other tracks.
5. Press [a] (Play) to start playback.
When all programmed selections have played, the unit stops
automatically.
• The programmed contents are retained in memory.
Note:
To play the program again, press [PROGRAM/RANDOM] twice
to call up the “Program Mode” screen, then press [a] (Play).
Random Playback [CD]
1. Press [PROGRAM/RANDOM] once in the stop mode.
• “Random On” appears on the TV screen.
• “RND” blinks on the display.
2. Press [a] (Play) to begin random playback.
• “RND” remains lit on the display.
The unit will automatically select tracks at random.
Note:
To stop random playback, press [n].
To clear the program one by one
1. Press [PROGRAM/RANDOM] twice to display the “Program
Mode” screen.
2. Press [o], [a], [p] or [b] to select the track number.
3. Press [CLEAR].
To clear all the programs
1. Press [PROGRAM/RANDOM] twice to display the “Program
Mode” screen.
2. Press [4] to select “All Clear”.
3. Press [ENTER].
To change the program
1. Press [PROGRAM/RANDOM] twice to display the “Program
Mode” screen.
2. Press [o], [a], [p] or [b] to select the track number.
3. Press the number buttons to select the track number to be
replaced.
Note:
To quit the “Program Mode” screen, press [PROGRAM/
RANDOM].
Important Note:
“ ” may appear on the TV screen during operation. This icon
means that the function is not available on the disc now.