Sanyo DWM-2600 Home Theater System User Manual


 
-E29-
File
1
2
3
4
5
6
7
MUSIC001
MUSIC002
MUSIC003
MUSIC004
MUSIC005
MUSIC006
MUSIC007
8
9
10
11
12
MUSIC008
MUSIC009
MUSIC010
MUSIC011
MUSIC012
1/24 00:00:00
HYPER-EURO-MAX
File: MAX
MP3 CD OPERATION
Before Starting
This unit can play back the CD that has recorded music data,
MP3 files.
The file system is ISO9660 Level 1 and Level 2.
If the CD has both audio CD tracks and MP3 files, only audio
CD tracks are played.
It would take 30 seconds or more for this unit to read MP3
files depending on its structure.
This unit can recognize up to 256 files or folders per disc. The
CD with 257 files or folders and over is not available to this
unit.
MP3 CDs may not be played in the recorded order.
1. Please use the MP3 software with the function that can
record data alphabetically or numerically.
2. Please refrain from making many sub-folders by
preference.
However, some CD-R/RWs cannot be played back depending
on the recording conditions.
Before playing back MP3 files, please read the following.
MP3 CD
MP3 files must have the extension letters, “.MP3” or “.mp3”.
Standard, sampling frequency, and the bit rate:
MPEG-1 Audio
32kHz, 44.1kHz, 48kHz
32kbps ~ 320kbps (constant bit rate or variable bit rate)
The recommended recording setting for a high-quality sound
is 44.1kHz of sampling frequency and 128kbps of constant
bit rate.
LIMITATIONS ON DISPLAY
Available letters for display are the following: capital or small
alphabets of A through Z, and numbers of 0 through 9.
Other letters than those above are replaced in “-” (hyphen).
CAUTION:
Some MP3 CDs cannot be played back depending on the
recording conditions.
The CD has no music data or non-MP3 files cannot be played
back.
The WMA files cannot be played back.
MP3 CD Playback
1. Press [z/ON] to turn the power on.
2. Press [FUNCTION] to select the “DVD/CD” function.
3. Push the disc (label facing up) gently into the loading slot until
automatic loading begins, then release the disc.
“LOADING” ---> “READING” appears on the FL display.
CAUTION:
Do not apply pressure to the disc after automatic
loading begins.
Do not pull the disc out while the disc is retracting
into the loading slot. This will damage the inside of
the unit and the disc.
“FILE LIST” appears on the FL display.
•A table of contents in the first directory appears on the TV
screen.
Example:
Note:
If the disc is loaded with the label side downward, or if a badly
scratched disc is loaded, “No Play” appears on the TV screen.
If this occurs, load the disc correctly or replace the disc.
Important Note:
” may appear on the TV screen during operation. This icon
means that the function is not available on the disc now.
Need help? Call
1-800-813-3435
Label facing up
File information
DWM-2600 Page E1-E43.p65 03.12.22, 11:35 AM29