Filter
Top Products
-E10-
COMPONENT VIDEO INPUTAUDIO INPUT
YP
BRL PR
1
2
+
1. Connect to the component video input jacks. (The VIDEO
OUT or S-VIDEO OUT jack connection is not necessary.)
2. Set the VIDEO OUT SELECT switch to the COMPONENT
position.
3. Set the unit to the PROGRESSIVE position. See page
E16.
*Please consult your local audio/video dealer.
*Component video cable (not supplied)
Green
Red
Blue
Green
Red
Blue
Progressive Scanning
While interlaced scanning produces one frame of video in two
fields, progressive scanning creates one frame in one field.
Conventional interlaced scanning constitutes one second with
30 frames (60 fields), but progressive scanning constitutes it with
60 frames from scratch. Progressive scanning can reproduce
sharper picture with high resolution for still image or other picture
containing long texts or horizontal lines.
This model has compliance with 525p (progressive) system.
TV with progressive-scan capability
Progressive-scan TV Connection
Notes:
• Please refer to your TV instruction manual.
• When you connect the unit to your TV, be sure to turn off the
power and disconnect both units from the wall outlet until all
the connections have been made.
• Do not connect the unit to a VCR directly. The playback
picture will be distorted because DVD video discs are copy
protected.
To AC 120V, 60Hz
Your TV must be capable of handling progressive scanning and have component video input capability.
Interlaced scanning
Progressive scanning
Need help? Call
1-800-813-3435
DWM-2600 Page E1-E43.p65 03.12.22, 11:35 AM10