Filter
Top Products
-E16-
VIDEO 1
Preparations
• Turn on the TV and select the video input source.
Refer to your TV’s owner manual.
DISC PLAYBACK
• Select the playback picture size according to the aspect ratio
of the TV. (See “Setting Display” in “INITIAL SETTINGS” on
page E33.)
TV
4:3 LB
(Letterbox)
4:3 PS
(Panscan)
16:9
• When you use a TV with Progressive-scan capability and
connect it to the COMPONENT VIDEO OUT jacks of the
unit (see page E10), you must select the PROGRESSIVE
mode. (For more details, please refer to your TV's owner
manual.)
Note:
If you use a Conventional TV or non-progressive-scan
TV, skip this section.
1. Set the VIDEO OUT SELECT switch to the COMPONENT
position before turn on the power. (See page E10.)
2. Press [z/ON] to turn on the power.
3. Press [FUNCTION] to select the “DVD/CD” function.
4. In “NO DISC” mode, press and hold down [ e ] on the
front panel of the unit until “
” (PROGRESSIVE)
appears briefly on the TV screen.
If you want to switch the setting back again, press
and hold down [
ee
ee
e ] until “ ” (INTERLACE)
appears briefly on the TV screen.
Note:
In “ ” mode, the closed caption may not appear on
the TV screen.
Important Note:
• This instruction manual explains the basic instruction of
this unit using the remote control unit.
• Some DVD video discs have different functions that may
not be explained in this instruction manual. You may need
extra instructions. In this case, please follow the instructions
displayed on the TV screen or jacket or case of the disc.
•“ ” may appear on the TV screen during operation. This
icon means that the function is not available on the disc
now.
• For improvement, on-screen displays subject to change
without notice.
Need help? Call
1-800-813-3435
DWM-2600 Page E1-E43.p65 03.12.22, 11:35 AM16