Filter
Top Products
-E12-
z/ONq
(Eject)
a
(Play)
FUNCTION VOLUME
MUTE
BASS
TUNE/BAND
FUNCTION
SOUND
z/ON
a
(Play)
q
(Eject)
– VOLUME +
4
5
Turning the power on and off
Press [z/ON] to turn the power on.
• “HELLO” appears briefly on the FL display.
(After connecting the power cord, when you press [z/ON] for the
first time, the volume-reset feature automatically sets the initial
volume level.)
When the power cord is connected to the AC outlet, the unit will
respond to commands from the remote control.
To turn the power off, press [z/ON] again.
• “GOOD-BYE” appears briefly on the FL display.
Smart start function
If the following buttons are pressed when the power is turned
off, the unit turns on automatically and the selected source is
activated.
[q], [a] (Front panel of the unit)
[q], [a], [TUNE/BAND] (Remote control)
Selecting the source
Press [FUNCTION] to select the desired source. Each time the
button is pressed, the display changes as follows:
DVD/CD
VIDEO 1
VIDEO 2
FM TUNER
AM TUNER
• When the source selection is changed, disc playback
automatically stops.
Adjusting the volume
Rotate [VOLUME] (or press [VOLUME] + or - on the remote
control). The volume level appears on the FL display (VOLUME
0 ~ VOLUME MAX).
To reduce the volume temporarily (muting)
Press [MUTE] on the remote control. “MUTE” blinks on the FL
display.
To restore the previous volume setting, press [MUTE] again.
BEFORE OPERATION
Selecting the sound mode
1. Press [SOUND] repeatedly to select the desired sound mode
(“BASS”, “TREBLE” or “NIGHT”).
2. Press the button as desired.
Common Operation
Note for “NIGHT”:
When enjoying a DVD disc with the volume set low at night,
select this mode. It enhances spoken lines making speech
clearer.
3. Repeat steps 1 to 2 for another sound mode.
4. Press [SOUND] repeatedly to close the display.
Bass boost system
Press [BASS] repeatedly to select the desired bass boost effect.
BASS BOOST v BASS OFF v NORMAL v BASS
BOOST . . .
Sound mode Press Display change
BASS p or o “-5” ~ “+5”
TREBLE p or o “-5” ~ “+5”
NIGHT ENTER “ON” or “OFF”
DWM-2600 Page E1-E43.p65 03.12.22, 11:35 AM12