54
You can set the time that this unit will shut itself off.
Press SLEEP button.
SLEEP : OFF 15 30 45 60 90 120 M (MIN) will be
selected in turn.
Press the SLEEP button.
The remaining time before this unit will shut itself off is shown on the
display.
Pressing the button again changes the sleep time from what you set previously.
Press SLEEP button until “SLEEP : OFF” appears on the display.
This function is useful when answering a doorbell or telephone call.
Press the MUTE button.
MUTE appears on the display.
Press the MUTE button again.
MUTE will disappear and sound will output.
SLEEP, Mute and the Adjust Display functions can only be operated with the remote control.
Signal outputs and frequency response from the speaker will be adjusted
according to your speaker conguration and whether certain speakers
are used or not.
Press the MUTE button.
MUTE appears on the display.
Press “0” button ve times and then press the ENTER button.
“INITIAL : NO” appears on the display.
Press
▲▼
buttons to select “YES”.
The unit will turn off after 5 seconds.
Turn off the power and hold the SELECT ( .,, ) button for longer than 5 seconds.
POWER STANDBY indicator will ash.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
~
~
~
~
~
~
M
`
~
~
~
1.
~
M
`
`
HT-AS730S-XAC_0213.indd 54 2009-02-16 �� 5:07:34