Filter
Top Products
51
ENG
●
You can listen to the radio by using either automatic or manual tuning.
Press TUNER button.
Selected frequency.
Automatic tuning 1 :
1) Press TUNING MODE button to select PRESET.
2) Press TUNING/CH ( .,, ) button to select the preset frequency.
Automatic tuning 2 :
1) Press TUNING MODE button to select MANUAL
2) Press and hold TUNING/CH ( .,, ) button to automatically tune in frequency.
Manual tuning :
1) Press TUNING MODE button to select MANUAL.
2) Press TUNING/CH ( .,, ) button briey to increase or decrease the frequency step by step.
You can also select FM by pressing the FUNCTION button on the front of your AV Receiver.
Press MO/ST button on the remote.
Each time you press this button, STEREO › MONO will be selected in turn.
If you select MONO in an area with weak reception, it will help to reduce noise.
This function works only with the Remote Control.
You can preset up to 30 FM stations.
E.g.: Setting station FM 89.10 in preset 2.
Press
TUNER button.
Press TUNING MODE button to select MANUAL and then press
TUNING/CH ( .,, ) button to select 89.10.
Refer to step 2 above to tune in automatically and manually.
Press TUNER MEMORY button.
Tuner number will blink on the display.
Press TUNING/CH ( .,, ) button to select preset 2.
You can select from presets 1 to 30.
Press TUNER MEMORY button.
Tuner number will disappear and station 89.10 will be saved
in preset 2.
To preset other stations, repeat steps 2 to 5.
Press TUNING MODE button of the remote control to select the PRESET and press TUNING/CH
( .,, ) button.
~
~
~
M
`
~
~
~
~
~
~
~
~
HT-AS730S-XAC_0213.indd 51 2009-02-16 �� 5:07:31