Filter
Top Products
38
This mode provides 7.1 channel sound from 2 channel sources.
Press SETUP/MENU button.
“INPUT” appears on the display and goes into Setup Mode.
Press
▲▼
button to select "SURROUND", and then press the
ENTER.
Press
▲▼
button to select "PL II x", and then press the
ENTER or
▶
button.
Press
▲▼
button to select the option you want, and then
press the ENTER or
▶
button.
: Each time you press
▲▼
button, MOVIE MUSIC
GAME MATRIX PL will be selected in turn.
: Adds realism to the movie soundtrack.
: Provides 7.1 channel surround sound for digital,
analog or existing stereo sources such as CD,
TAPE, FM, TV and stereo VCR.
: Enhances the excitement of the game’s sound.
: You will hear 7.1 channel surround sound.
: You will experience a surround effect with just the front
left and right speakers.
You can set it ON or OFF.
(This mode extends the front stereo image to include the
surround speakers for an exciting "wraparound" effect with side wall imaging.)
: You can set from -7 to +7.
(Incrementally adjusts the sound eld (DSP)from the front or surround.)
You can set from 0 to 7.
(This sets the width of the center image. The higher the setting, the less sound comes from the
center speaker.)
PANORAMA, DIMENSION and CENTER WIDTH settings are enabled only if the mode is set to
"MUSIC".
You cannot use Dolby Pro Logic llx mode for multi channel signals such as Dolby Digital and DTS.
Pro Logic works only for PCM audio signals with sampling frequencies of 32KHz, 44KHz or
48KHz.
Sound will not be output from the surround back speakers if the PCM audio signal is mono.
~
~
~
~
~
M
`
`
`
`
HT-AS730S-XAC_0213.indd 38 2009-02-16 �� 5:06:59